The Stowe Dataline Load Cell system consists of the DLA1 Digital Loadcell amplifier and a Stowe Dataline GX display. Various sizes of load cells are available depending on the load to be measured.
The Digital Loadcell Amplifier converts a standard load cell or load pin into NMEA 2000 ready CANbus, RS232, NMEA 0183, and 0-5V analogue data. It also has a trip relay for use as an alarm output and/or a limit switch and an analogue input to measure battery voltage.
The DLA1 can be connected directly to one or more Stowe Dataline GX displays and a Load pin to work as a standalone system showing Load and Battery Voltage. User friendly calibration and alarm settings can be carried out entirely from the display buttons. Alternatively the DLA1 can also be calibrated from a PC connected via RS232 or via a hidden push button and adjustment inside the top cover for calibration when connected to a B&G 10/10, B&G 20/20 or aTackTick system and when no Stowe display is required. Multiple DLA1's and load cells can be connected to one or more displays.
The DLA1 offers fantastic accuracy, stability and noise immunity.
Amplifier specification:
Power
Voltage Input 10 to
32 VDC
Current consumption
50 mA
Construction
Rugged ABS case
Silicone Gasket
Cable Gland
Dimensions
80mm x 135mm x
53mm including gland
Display specification:
Power
Voltage Input 10 to
32 VDC
Current consumption
100 mA (125 mA with lighting)
Display
160x128 pixel FSTN
LCD 4 Level Grayscale
Backlight Green LED 8
levels
Illuminated Keys
Green LED
