Stowe Marine Electronics

Home       Products       Support       Information       Contact       Links

Stowe Marine Dataline Databox


 Download Brochure     Download Demo Software

Stowe Dataline Databox SD (Speed/Depth)

  • Provides Boat Speed, Depth, Log, Temperature & Battery Volts to Dataline system or a single display
  • Can be used with Mast Head Unit to provide a complete system with True Wind and VMG
  • Simple calibration
  • Uses any existing Stowe sensors, as well as sensors from most other manufactures
  • Bluetooth version available

The Dataline Databox SD calculates Boat Speed, Depth, Sea Temperature and Battery Volts when connected to compatible sensors. It will also combine an additional NMEA input of data from other instruments, such as Mast Head Unit, GPS or Compass.

The Databox SD can be used with any Stowe Speed and Depth sensors and also can also be used with many sensors from other manufactures.

This unit is designed to be used with the Stowe Dataline GX displays, but attention has also been taken to make it backwards compatible with older Dataline displays and also to give a standard NMEA output for use by other manufactures systems.

Specification:

Boat Speed 0 to 99.99 knots, resolution 0.01 knot
Depth 0.8 to 120m, resolution 0.1m

Log Cumulative 0 to 9999.9 nm, resolution 0.1nm
Sea Temperature -5 to 40 degrees centigrade
Battery Voltage 10 to 16 Volts, resolution 0.1V
Current 50mA + requirements for up to 15 displays

Depth frequency switchable 150, 170, 200 and 205kHz

Speed Sensor Hall Effect or Coil type

A Bluetooth version is available for connection to a Laptop or an Android tablet, etc. Using the standard Bluetooth Serial Protocol.

Design subject to change without notice

(c) 2007-2013 Stowe Marine Limited